Visqueen Non-Combustible DPC Fixing strip 1.24m (17 per pack)

Flexible stainless steel fixing strip (1240mm length) with pre-drilled 8mm holes at 150mm centres. Designed for use with surface-fixed Visqueen Zedex Non-Combustible DPC systems. Supplied in packs of 17.

Key Features:

• Flexible & cuttable – easy to shape on-site

• Pre-drilled holes – speeds up installation

• Corrosion-resistant – made from stainless steel grade 1.4301 (304)

• Secure lap continuity – ends align for overlap

• Non-combustible – A1 fire rated (European Commission)

• Certified to ISO 9001, 14001, 45001

Typical Uses:

• Fixing surface-bonded DPC or preformed units to vertical masonry or steelwork

• Specifically developed for use with Visqueen Zedex Non-Combustible DPC systems

Installation Guidance:

• Position strip 5mm below DPC upper edge

• Fix at 150mm centres for best performance (every hole)

• Max spacing 300mm if needed (every other hole)

• Overlap ends to align holes and maintain continuity

• Can be bent around obstructions (e.g. columns)

• Cut to size with hacksaw on site

System Compatible With:

• Visqueen Zedex Mastic (380ml)

• Visqueen Zedex Non-Combustible DPC

• Visqueen Non-Combustible Preformed & Flexi Units

Additional Notes:

• Store flat and dry, in original packaging

• Although the strip is temperature-resistant, other system components should not be installed below 5°C

• For below-ground or aggressive environments, higher-grade stainless steel may be required